25.2V Charger 25.9V Output 29.4V 2A for Hoverboard Suspension Shoes Ebike Scooter 7Series Lithum Li ion Battery DC5.5 x 2.1 x 11mm

April 2, 2019 - Comment

Doesn’t work with hover board 1.5 Razor Product Description Input: AC 100-240V 50/60Hz 1.2A Output:29.4V 2A LED Display Red:Charging Green: Charged OK Working Temp/humidity:-10°C-50°C,20%-90%RH Storage Temp/humidity:-10°C-60°C,20%-90%RH Charger DC Plus(DC Optional):DC 5.5 2.1mm Faster and safer charging with our adapter Intelligent high-speed charging for most 29.4V versions scooters Package include: 1 x 29.4V 2A battery charger

Doesn’t work with hover board 1.5 Razor

Product Description
Input: AC 100-240V 50/60Hz 1.2A
Output:29.4V 2A
LED Display
Red:Charging
Green: Charged OK
Working Temp/humidity:-10°C-50°C,20%-90%RH
Storage Temp/humidity:-10°C-60°C,20%-90%RH
Charger DC Plus(DC Optional):DC 5.5 2.1mm
Faster and safer charging with our adapter
Intelligent high-speed charging for most 29.4V versions scooters
Package include:
1 x 29.4V 2A battery charger
1 x DC plug cord

Tangspower has always devoted itself to providing products with excellent quality for the end-users

Use and maintenance of the charger :
1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug.
If you pull the battery plug first while charging, especially when the charging current is large (red light), it is very easy to damage the charger.
2. When the LED light turns green, please continue charging for 2-3 hours.
3. Please do not run out of battery power, then charger. Otherwise the battery cannot be protected or even damaged.
4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting, which is conducive
to the activation of long-term immobile material in the deep part of the battery. Luminous means that riding the controller battery undervoltage protection action.
5. If your battery has not been used for a long time (2-3 months), please charge the battery before using it. Make sure your battery is not broken.
6.Please use the charger in a dry place in time.
7.When you do not use the charger, do not always connect the power supply.
8.Please confirm your battery, Because it is used to charge the lithium battery. Do not use the charger on the LiFepo4
battery, otherwise the charger will be got incredibly hot.

Product Features

  • Output 29.4V, World Wide Input Voltage 100-240VAC 50/60Hz
  • 105℃ Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum.The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking.
  • The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable.
  • The charger protected: Short circuit protection/ over current protection/ over voltage protection; red light — charging, green light — charge OK, it stop automatically when the battery is full.
  • Replace your broken charger or add an extra charger to charge in 2 locations without taking the original charger with you

Comments

Anonymous says:

Lost the original FLJ S3 Scooter Charger… This works perfectly with the FLJ S3 scooter. I haven’t encountered any other issues and it charges cooler than the stock charger. Definitely recommend this if you lost the original charger or just want to bring around with you and one at home.

Anonymous says:

An actual lithium 7s charger, not a dumb power brick. Used to charge a 7s lithium polymer battery. This charger does indeed do constant current followed by constant voltage at 29.4v (with decreasing current). Seems perfect so I might not need a BMS protection board.

Anonymous says:

Great working charger!! EXACTLY WHAT I NEEDED This charger worked for my son’s hoverboard. I couldn’t find one that matched his hoverboard for a long time it didn’t come with one when I ordered it, just am super happy with the quality of this charger and supper excited that it truly worked for this hoverboard.

Comments are disabled for this post.